E-postama gönder EFFECTS ON THE SURFACE QUALITY IN THE MACHINING PROCESSES OF THE TOOL VIBRATIONS
Öz
The problem of surface quality and cutting stability in the machining processes is very important and is strictly connected with the final quality of the product. Therefore, this paper describes a new theoretical model for the dynamic cutting forces of orthogonal cutting in turning. A specific advantage for the presented model is the convenience for vibration prediction. The presented dynamic force model is used to predict variable cutting forces with dynamic cutting between cutting tool and workpiece. This model is considered two degree of freedom complex dynamic model of turning with orthogonal cutting system. The complex dynamic system consists of dynamic cutting system force model which is based on the shear angle (φ) oscillations and the penetration forces which are caused by the tool flank contact with the wavy surface.
Anahtar Kelimeler
Tam Metin:
PDF (English)Referanslar
Benardos, P.G., Vosniakos, G.C., Predicting surface roughness in machining: a review, International Journal of Machine Tools & Manufacture 43 2003; 833–844.
Landers, R.G., Ulsoy, A.G., Chatter analysis of machining systems with nonlinear force processes, ASME International Mechanical Engineering Congress and Exposition, Atlanta, Georgia, November 17-22 1996; DSC Vol. 58, 183-190.
Tlusty, J., Manufacturing processes and equipment, Prentice Hall, New Jersey, 2000.
Groover, M.P., Fundamentals of Modern Manufacturing: Materials, Processes, and Systems, Prentice Hall, New Jersey 1996.
Siddhpura, M., Paurobally, R., A review of chatter vibration research in turning, International Journal of Machine Tools & Manufacture 61 2012; 27–47.
Turkes, E., Orak, S., Neseli, S., Yaldiz, S., A new process damping model for chatter vibration, Measurement 44 2011; 1342–1348.
Bailey, J.A., Friction in metal machining-mechanical aspects, Wear 31 1975; 243.
Kim, J.S., Lee, B.H., An analytical model of dynamic cutting forces in chatter vibration, Int. J. Mach. Tool Des. Res. 31 1991; 371.
Wu, D.W., Liu, C.R., An analytical model of cutting dynamics, part 1: Model building, J. Eng. Ind. Trans. ASME 107 1985; 107.
Turkes, E., Orak, S., Neseli, S., Yaldiz, S., Linear analysis of chatter vibration and stability for orthogonal cutting in turning, Int. Journal of Refractory Metals and Hard Materials 29 2011; 163-169.
Budak, E., An analytical design method for milling cutters with nonconstant pitch to increase stability Part I: theory. J Manuf Sci Eng Trans ASME 2003; 125:29–34.
Budak, E., An analytical design method for milling cutters with nonconstant pitch to increase stability Part II: application, J Manuf Sci Eng Trans ASME 2003; 125:35–8.
Sahin, M., Çetinarslan, C.S., Akata, H.E., Effect of surface roughness on friction coefficients during upsetting processes for different materials, Materials and Design 28 2007; 633–640
Zhu D, Zhang X, Ding H. Tool wear characteristics in machining of nickelbased superalloys. International Journal of Machine Tools and Manufacture 2013; 64: 60-77.
Courbon C, Pusavec F, Dumont F, Rech J, Kopac J. Tribological behaviour of Ti6Al4V and Inconel718 under dry and cryogenic conditions— Application to the context of machining with carbide tools. Tribology International 2013; 66: 72-82
Pusavec F, Hamdi H, Kopac J, Jawahir I S. Surface integrity in cryogenic machining of nickel based alloy—Inconel 718. Journal of Materials Processing Technology 2011; 211(4): 773-783.
Madde Ölçümleri
Metrics powered by PLOS ALM
Refback'ler
- Şu halde refbacks yoktur.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Selçuk-Teknik Dergisi ISSN:1302-6178