PEM YAKIT HÜCRESİNİN KATOD TARAFI PERFORMANSININ GELİŞTİRİLMESİ
Öz
Bu çalışmada, PEM yakıt hücresinin katod tarafı yitriya stabilize edilmiş zirkonya (YSZ) ile kaplanmış ve PEM yakıt hücresinin performansı deneysel olarak incelenmiştir. 2 gr YSZ+10 mL methanolden oluşan bir karışım hazırlanmıştır. PEM yakıt hücresinin katod tarafı spin metodu ile YSZ kaplanmıştır. Kaplamadan sonra membran 24 saat kurumaya bırakılmıştır. Deneylerde, kaplama öncesi ve kaplama sonrası akım yoğunluğu, gerilim yoğunluğu ve güç yoğunluğu performansları tespit edilerek birbiri ile mukayese edilmiştir. PEM yakıt hücresinin katod tarafı YSZ ile kaplandığında, çalışma süresinin arttığı tespit edilmiştir.
Anahtar Kelimeler: Yitriya stabilize edilmiş zirkonya (YSZ); Yakıt hücresi; Polimer Elektrolit Membran (PEM); Membran.
IMPROVEMENT OF PERFORMANCE OF CATHODE SIDE OF PEM FUEL CELL
Abstract
In this study, performance of PEM was experimentally investigated coating on the cathode side of the PEM fuel cell was accomplished with the spinning method by using yttria-stabilized zirconia (YSZ). A solution having 2 gr YSZ+10 mL methanol was prepared. Then the cathode side of PEM fuel cell was cladded with YSZ by using spinning method. After coating, the membrane was left out to dry for 24 hours. In the experimental study, current density, voltage density and power density performances before and after coating have been recorded and then are compared to each other. The cathode side of PEM fuel cells coated with YSZ, the run-time was found to be increased.
Keywords: Yttria-stabilized zirconia (YSZ); Fuel cell; Polymer Electrolyte Membrane (PEM); Membrane.
Anahtar Kelimeler
Tam Metin:
PDFReferanslar
http://www.hurriyet.com.tr/teknoloji/6600761.as, 25.11.2013.
http://yakitpili.com/?page_id=11, 28.11.2013.
http://yunus.hacettepe.edu.tr/~yilser/protondegisim.htm, 28.11.2013.
http://cevre.beun.edu.tr/dersnotu/yakitpilleri/cev346-yakit-pilleri.pdf, 25.11.2013.
Berg, P., Kimmerle, S., Novruzi, A., 2014, “Modeling, Shape Analysis and Computation of the Equilibrium Pore Shape Near a PEM-PEM Intersection”, Journal of Mathematical Analysis and Applications, Vol. 410 No: 1, pp. 241-256.
Lang, S., Kazdal, T., Kuehl, F., et al., 2014, “Diffusion coefficients and VLE data of aqueous phosphoric acid”, Journal of Chemical Thermodynamıcs, Vol., 68, pp. 75-81.
Chang, T.C., Zhang, J.P., Fuh, Y.K., 2014, “Electrical, Mechanical and Morphological Properties of Compressed Carbon Felt Electrodes İn Vanadium Redox Flow Battery”, Journal of Power Sources, Vol. 245, pp. 66-75.
Kadakia, K., Datta, M. Kanchan, V., Oleg I., et al. 2014, “High Performance Fluorine Doped (Sn, Ru)O2 Oxygen Evolution Reaction Electro-Catalysts For Proton Exchange Membrane Based Water Electrolysis”, Journal of Power Sources, Vol. 245, pp. 362-370.
Eastcott, J., Easton, I., Bradley, E., 2014, “Sulfonated Silica-Based Fuel Cell Electrode Structures for Low Humidity Applications”, Journal of Power Sources, Vol.: 245 pp. 487-494.
Siracusano, S., Baglio, V., Lufrano, F., et al., 2013, “Electrochemical Characterization of a PEM Water Electrolyzer Based on a Sulfonated Polysulfone Membrane”, Journal of Membrane Science, Vol. 448, pp. 209-214.
Higgins, D.C., Chen, Z., 2013, “Recent Progress in Non-Precious Metal Catalysts for Pem Fuel Cell Applications”, Canadian Journal of Chemical Engineering, Vol. 91, pp. 1881-1895.
Madde Ölçümleri
Metrics powered by PLOS ALM
Refback'ler
- Şu halde refbacks yoktur.
Selçuk-Teknik Dergisi ISSN:1302-6178